Console House 15 Mode Especificaciones Pagina 402
- Pagina / 440
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
386 Ion Operations Manual
Patch Mode
In patch mode, the LCD displays the channel, address and type for the currently selected
channel(s).
Softkeys
The following softkeys are available in patch mode:
•Address
•A
•B
•/
• Fixture Controls (shown as: FixCtrl)
{Address} allows you to change the address of the selected channel.
• [1] {Address} [1] [Enter] - addresses channel 1 to output 1.
{A} and {B} are used for patching dimmer doublers.
• [9] [7] [Th] [1] [0] [2] {Address} [1] {B} [Enter] - patches channels 97-102 to outputs 1B-6B
(for dimmer doubling).
{/} is used to patch the port and offset.
• [2] {Address} [3] [/] [1] [Enter] - patches channel 2 to port 3 offset 1 or address 1025.
{FixCtrl} is used to display the fixture controls for a channel (if available).
• [6] {FixCtrl} - displays fixture controls for channel 2.
The thumbwheel will scroll through the available fixture controls. Press the thumbwheel to activate
the fixture control.
- Lighting Control Console 1
- Operations Manual 1
- Table of Contents 3
- Chapter 2 4
- Chapter 3 5
- Chapter 4 5
- Chapter 6 6
- Chapter 7 7
- Chapter 8 7
- Chapter 9 8
- Chapter 10 8
- Chapter 12 9
- Chapter 13 9
- Chapter 14 10
- Chapter 15 10
- Chapter 16 10
- Chapter 17 11
- Chapter 18 11
- Chapter 19 11
- Chapter 20 12
- Chapter 21 12
- Chapter 22 12
- Chapter 23 13
- Chapter 24 13
- Chapter 25 13
- Chapter 26 14
- Chapter 27 14
- Chapter 28 14
- Appendix A 14
- Appendix B 14
- Appendix C 15
- Appendix D 15
- Appendix E 15
- Appendix F 15
- 14 Ion Operations Manual 16
- Introduction 17
- Using this Manual 18
- Register Your Ion 19
- Important Concepts 20
- Tracking vs. Cue Only 21
- Move Fade 22
- Block vs. Assert 22
- Live and Blind 23
- HTP vs. LTP 23
- Other Reference Materials 24
- System Overview 25
- System Components 26
- 1 System Overview 11 27
- Gateways 27
- Console Geography 28
- 1 System Overview 13 29
- Terminology 29
- Littlites 30
- Cleaning Ion 30
- Outputting DMX 30
- Console Capacities 31
- 16 Ion Operations Manual 32
- System Basics 33
- Setting Up the Hardware 34
- 2 System Basics 19 35
- Power Up the Console 35
- Power Down the Console 35
- Your First Interaction 36
- 2 System Basics 21 37
- Dual Monitor Configuration 37
- Collapse/Expand the CIA 38
- 2 System Basics 23 39
- Lock the CIA 39
- Favorite CIA Display 39
- Locking the Facepanel 39
- Using the Browser 40
- 2 System Basics 25 41
- Fader Module 41
- Using Direct Selects 41
- Direct Selects in Flexi Mode 42
- 2 System Basics 27 43
- Clear Functions 43
- Opening and Closing Displays 44
- 2 System Basics 29 45
- Selecting Displays 45
- Moving Displays 45
- Scrolling within a Display 45
- Expanding Displays 46
- Zooming Displays 46
- 2 System Basics 31 47
- Color indicators 48
- 2 System Basics 33 49
- 34 Ion Operations Manual 50
- 2 System Basics 35 51
- [Data] Key 51
- [Time] Key 51
- [Label] Key 51
- Using Flexichannel 52
- 2 System Basics 37 53
- 38 Ion Operations Manual 54
- Using [Format] 55
- Table View 56
- 2 System Basics 41 57
- Playback Status Display 58
- 2 System Basics 43 59
- 44 Ion Operations Manual 60
- Encoders 61
- Moving Light Controls 62
- Using Softkeys 63
- 48 Ion Operations Manual 64
- Managing Show Files 65
- Create a New Show File 66
- Open an Existing Show File 66
- 3 Managing Show Files 51 67
- 3 Managing Show Files 53 69
- Merging Show Files 70
- Printing a Show File 71
- 56 Ion Operations Manual 72
- Saving the Current Show File 73
- Using Quick Save 73
- Using Save As 73
- Importing Show Files 73
- Exporting a Show File 74
- Deleting a File 74
- File Manager 74
- About Patch 76
- Flexichannel Views in Patch 78
- Labeling 78
- 4 Patch 63 79
- Patching By Channel 79
- Range Patching 79
- Patching By Address 79
- Helpful Hints 80
- {Address} [n] [/] 80
- 4 Patch 65 81
- Dimmer Doubling 81
- Moving and Copying Channels 81
- Swapping Channels 82
- Unpatch a Channel 82
- Deleting Channels 82
- 4 Patch 67 83
- Using {Offset} in Patch 83
- Using the Picker 84
- 4 Patch 69 85
- Using the Editor 85
- 70 Ion Operations Manual 86
- Scroller Fan Curves 87
- 72 Ion Operations Manual 88
- 4 Patch 73 89
- 74 Ion Operations Manual 90
- 4 Patch 75 91
- Display Pages in Patch 92
- 4 Patch 77 93
- 78 Ion Operations Manual 94
- 4 Patch 79 95
- Adding Keywords in Patch 96
- 4 Patch 81 97
- Using Device List 98
- 4 Patch 83 99
- RDM Device List 100
- 4 Patch 85 101
- Errors and Warnings 102
- Clearing the Patch 103
- Fixture Creator 104
- 4 Patch 89 105
- Define Parameters 106
- CAUTION: 106
- 4 Patch 91 107
- Copying a Fixture 108
- Importing a Custom Fixture 108
- Update Library 108
- 4 Patch 93 109
- Snap Parameters 109
- 94 Ion Operations Manual 110
- Chapter 5 111
- Opening Setup 112
- 5 Setup 97 113
- Fader Configuration 114
- 5 Setup 99 115
- Show Control 116
- 5 Setup 101 117
- Partitions 118
- 5 Setup 103 119
- {Manual Control} 120
- 5 Setup 105 121
- {Face Panel Keypad} 122
- 5 Setup 107 123
- {PDF File Settings} 124
- {Brightness Settings} 124
- {Fader Wing Config} 124
- 5 Setup 109 125
- 110 Ion Operations Manual 126
- Basic Manual Control 127
- Selecting Channels 128
- 6 Basic Manual Control 113 129
- Setting Intensity 130
- 6 Basic Manual Control 115 131
- Parameter Display 131
- 116 Ion Operations Manual 132
- 6 Basic Manual Control 117 133
- Encoder softkeys 134
- 6 Basic Manual Control 119 135
- 120 Ion Operations Manual 136
- 6 Basic Manual Control 121 137
- Using the Color Picker 137
- 122 Ion Operations Manual 138
- Select Last 139
- Multiple Intensity Channels 140
- Lamp Controls 141
- Using +% and -% 142
- Remainder Dim 143
- Highlight and Lowlight 144
- 6 Basic Manual Control 129 145
- Temporary Highlight Level 145
- Highlight/Lowlight Rem Dim 145
- 130 Ion Operations Manual 146
- Channel Check 147
- Address at Level 147
- Address Check 147
- Using {Move To} 148
- Using Groups 149
- Recording Groups Live 150
- Selecting Groups 151
- Group List 152
- 7 Using Groups 137 153
- 138 Ion Operations Manual 154
- Storing and Using Palettes 155
- About Palettes 156
- Palette Types 156
- Palette Options 156
- {Locked} 157
- Storing Palettes Live 158
- Using Filters with Palettes 160
- Recalling Palettes 161
- Editing Palettes Live 162
- Editing Palettes in Blind 163
- Editing Palettes in List View 164
- Deleting Palettes 165
- Using By Type Palettes 166
- Storing and Using Presets 167
- Storing Presets Live 168
- Preset Options 169
- Recalling Presets 170
- Editing Presets Live 171
- Using the Preset List 172
- Editing Presets in Blind 173
- Editing in Spreadsheet View 174
- Deleting Presets 174
- Using Fan 175
- About Fan 176
- 10 Using Fan 161 177
- Fanning References 177
- Fanning Timing and Delays 177
- 162 Ion Operations Manual 178
- Chapter 11 179
- Basic Cueing 180
- Recording Cues in Live 181
- Using Record Only 182
- Using Selective Store 183
- Using [Cue Only / Track] 184
- Setting Cue Level Timing 185
- Manual Timing at a Cue Level 186
- Delay Time 187
- [Time][/] 187
- 172 Ion Operations Manual 188
- Assigning Cue Attributes 189
- Link/Loop 190
- Clearing Cue Attributes 191
- At a cue level 192
- Using External Links 194
- Modifying Cues Live 195
- Record and Record Only [+] 196
- [Update] 197
- Default Update Modes 198
- Updating to References 198
- Update Break Nested 199
- Using Cue Only/Track 199
- Using Trace 200
- Updating the Current Cue 200
- Updating a Source Cue 200
- Updating a Non-Active Cue 200
- Update [Thru] 200
- Update [+] 201
- To Live From Blind 202
- From Summary or Table Views 203
- From the Cue Spreadsheet 203
- Using Encoders in Blind 204
- Deleting Cues 205
- 190 Ion Operations Manual 206
- Using Mark 207
- AutoMark 208
- Referenced Marks 209
- Mark Display Indicators 210
- Removing Referenced Marks 210
- 12 Using Mark 195 211
- Mark Symbols 212
- 12 Using Mark 197 213
- Reference Marks and Timing 213
- Mark Time 213
- 198 Ion Operations Manual 214
- Using Filters 215
- Record Filters 216
- 13 Using Filters 201 217
- Partial Filters 217
- Removing Filters 217
- 202 Ion Operations Manual 218
- Recording to a New Cue List 220
- At a Cue Level 221
- At a Cue List Level 221
- At a Channel Level 221
- Using AllFade 222
- Changing the Active Cue List 222
- Using Go To Cue 0 223
- Using Go To Cue Out 223
- Using the Cue List Index 224
- Cue List Attributes 225
- Solo Mode 226
- Fader type 226
- Background 226
- Multipart Cues 227
- About Multipart Cues 228
- 15 Multipart Cues 213 229
- Using Update in Live 229
- 214 Ion Operations Manual 230
- Cue Playback 231
- Introduction to Playback 232
- Selected Cue 233
- Out-of-Sequence Cues 234
- 16 Cue Playback 219 235
- Slider Module 236
- Playback Fader Controls 237
- Using Manual Control 238
- 16 Cue Playback 223 239
- Using Timing Disable 240
- Using Freeze 240
- 16 Cue Playback 225 241
- Using Stop Effect 241
- Using Rate Override 241
- Manual Master Cue Lists 242
- Advanced Manual Control 243
- Using [Copy To] 244
- Using [Recall From] 245
- Using {Make Null} 246
- Using {Make Manual} 247
- Using {Make Absolute} 247
- Using {Query} 248
- Using [Capture] 249
- Using [Undo] 250
- Using Park 251
- 18 Using Park 237 253
- Scaled Parked Values in Live 253
- Parked Addresses in Live 253
- 238 Ion Operations Manual 254
- Creating and Using Effects 255
- About Effects 256
- Effects Editor 257
- 242 Ion Operations Manual 258
- Effect Status Display 260
- Step Effects 261
- Program a Step Effect 262
- Delete a step 263
- Insert a step 263
- Absolute Effects 264
- Program an Absolute Effect 265
- Relative Effects 266
- Color Effects 267
- Linear Effects 267
- Define a Pattern Shape 268
- Program a New Relative Effect 268
- Apply an Existing Effect 269
- Effects on Submasters 270
- Delaying Effects 271
- 256 Ion Operations Manual 272
- Storing and Using Submasters 273
- About Submasters 274
- Submaster Displays 275
- Exclusive Submasters 276
- Priority 276
- Submaster Background State 277
- Changing Fader Pages 278
- Loading Submasters 279
- Updating a Submaster 280
- Deleting a Submaster 280
- Controlling Subfades Manually 281
- Submaster List 282
- Using About 283
- About [About] 284
- 21 Using About 269 285
- About System 285
- About Channel 286
- 21 Using About 271 287
- About Address 288
- 21 Using About 273 289
- 274 Ion Operations Manual 290
- 21 Using About 275 291
- About Cue 291
- About IFCB Palettes 291
- About Presets 291
- About Groups 291
- About Curves 292
- Storing and Using Curves 293
- Creating and Editing Curves 295
- Editing Curves 296
- Applying a Curve 297
- Delete a Curve 297
- 282 Ion Operations Manual 298
- Storing and Using Snapshots 299
- About Snapshots 300
- Recording Snapshots 300
- Recalling Snapshots 301
- Editing Snapshots 301
- 286 Ion Operations Manual 302
- Storing and Using Macros 303
- About Macros 304
- Store a Macro from Live 304
- Storing and Using Macros 289 305
- Macro Editor Display 306
- Storing and Using Macros 291 307
- 292 Ion Operations Manual 308
- Edit an Existing Macro 309
- Play a Macro 310
- Delete a Macro 310
- Using Magic Sheets 311
- About Magic Sheets 312
- Magic Sheet Display 313
- Magic Sheet List 314
- Display Tools 314
- Navigating a Magic Sheet 315
- Quick Save 316
- 25 Using Magic Sheets 301 317
- Layout Tools 317
- Alignment 318
- 25 Using Magic Sheets 303 319
- Magic Sheet Object Library 319
- 304 Ion Operations Manual 320
- 25 Using Magic Sheets 305 321
- Background Settings 322
- 25 Using Magic Sheets 307 323
- MS Object Properties 323
- 308 Ion Operations Manual 324
- Examples of Magic Sheets 325
- 310 Ion Operations Manual 326
- Virtual Media Server 327
- About Virtual Media Server 328
- 26 Virtual Media Server 313 329
- Exporting Media Content 330
- 26 Virtual Media Server 315 331
- Creating a Pixel Map 331
- 316 Ion Operations Manual 332
- 26 Virtual Media Server 317 333
- 318 Ion Operations Manual 334
- 26 Virtual Media Server 319 335
- 320 Ion Operations Manual 336
- 26 Virtual Media Server 321 337
- Effect Layers 338
- 26 Virtual Media Server 323 339
- 324 Ion Operations Manual 340
- 26 Virtual Media Server 325 341
- Synchronizing Media Archives 341
- 326 Ion Operations Manual 342
- Multiple Users 343
- About User ID 344
- Using Partitioned Control 345
- About Partitioned Control 346
- Creating New Partitions 347
- Deleting Partitions 347
- Using Partitions 348
- Eos Configuration Utility 349
- Starting Screen 350
- General Settings 352
- Eos Configuration Utility 337 353
- Monitor Arrangement 354
- Software Update 355
- Network Settings 356
- Eos Configuration Utility 341 357
- Output Protocols 358
- Interface Protocols 359
- DHCP Service 360
- Update Service (TFTP) 360
- Time Service (SNTP) 361
- Maintenance and Diagnostics 362
- Eos Configuration Utility 347 363
- Upgrade I/O Firmware 364
- Network Drives 364
- Shared Folders 364
- Firmware Update 365
- Face Panel Test 366
- Local I/O 367
- 352 Ion Operations Manual 368
- Facepanel Shortcuts 369
- Operations 370
- B Facepanel Shortcuts 355 371
- 356 Ion Operations Manual 372
- Multi-console setup 374
- Network Type 375
- Change IP Address 375
- Multi-console backup 376
- Synchronized Backup 377
- 362 Ion Operations Manual 378
- Backup Scenarios 379
- Remote Software Installation 380
- Remote Power On/Off 380
- Mirror Mode 381
- Exiting Mirror Mode 382
- Using the RPU and RVI 383
- Remote Processor Unit (RPU) 384
- Start Up 385
- Software Configuration 386
- Basic Use Guidelines 387
- RVI3 and RVI Overview 388
- Remote Video Interface (RVI) 389
- Hardware Setup 390
- D Using the RPU and RVI 375 391
- RVI Start Up 391
- Displays 391
- Button Configuration 391
- 376 Ion Operations Manual 392
- Remote Control 393
- Radio Focus Remote (RFR) 394
- Handheld Remote 394
- Direct USB 395
- Setup: HF EUR 396
- Recharge the Handheld Battery 398
- Remotes Enabled/Disable 398
- RFR Operation Modes 399
- Live Mode 400
- E Remote Control 385 401
- Playback Mode 401
- Patch Mode 402
- Technical Specifications 403
- 388 Ion Operations Manual 404
- Universal Fader Wings 405
- Attach Universal Fader Wings 406
- Bumpers on 406
- F Universal Fader Wings 391 407
- 2x10 or 2x20 408
- Multiple wings connected 408
- F Universal Fader Wings 393 409
- Using the Buttons 409
- Loading Faders 409
- Fader Wing Paging 409
- Using the Faders 410
- 396 Ion Operations Manual 412
- 398 Ion Operations Manual 414
- 400 Ion Operations Manual 416
- 402 Ion Operations Manual 418
- 404 Ion Operations Manual 420
- 406 Ion Operations Manual 422
- 408 Ion Operations Manual 424
- 410 Ion Operations Manual 426
- MUN 101879-2.009900.0011 429
© 2020, manymanuals.es. Todos los derechos reservados | 0.045 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales