Console House 10 Mode Instrucciones de operaciones descargar pdf (Pagina 102)

When Entry/Exit Chime is set to Yes, the console(s) will beep once

when a door on an entry/exit zone is opened, even if the alarm system

is off. This lets you know when someone enters and leaves.

If you wish to turn the Entry/Exit Chime Off, press 0 then ' # '. To

turn it back On, press 1 then ' # '.

The default setting for Entry/Exit Chime is Yes.

When Perimeter Chime is set to Yes, the console(s) will beep once

when a window or any other perimeter zone is opened, even if the

alarm system is off.

If you wish to turn the Perimeter Chime Off, press 0 then ' # '. To turn

it back On, press 1 then ' # '.

The default setting for Perimeter Chime is Yes.

The Quick Arm feature allows the security system to be armed by

pressing the desired mode key twice instead of having to enter your

code.

To enable Quick Arm , press 1 then ' # '. To disable this feature, press

0 then ' # '.

The default setting for Enable Quick Arm is No.

The Auto-Bypass feature allows the system to automatically bypass an

open zone when the system is armed, rather than setting off the alarm.

In some applications, it may be preferable to allow arming only if all

zones are secure (READY).

To turn Auto-Bypass On, press 1 then ' # '. To turn Auto-Bypass Off,

press 0 then ' # '.

With Auto-Bypass Off, all zones to be armed must be secure when the

system is armed. Otherwise, the console will beep three times and

Entry/Exit Chime

Perimeter Chime

Enable Quick Arm

Enable Auto Bypass

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 135 136

Sin comentarios

Console House 10 Mode Instrucciones de operaciones Pagina 102