Console House 10 Mode Instrucciones de operaciones descargar pdf (Pagina 50)

At this point, you may press the ' # ' key to control the unit as specified

under Controlling Units.

2 = ZONE

The Zone Status menu allows you to view and scroll through the status

of each zone input. To enter the Zone menu, from the Status menu,

press the 2 (ZONE) key on the console keypad. The system will

display:

Front Door SECURE

ZONE 1

↓

You may enter a zone number to start displaying the status with zone,

or simply press the down arrow key to start with the first zone. The

arrow keys may be used to continue scrolling between zones. For each

zone, the display will show the zone name, the zone number, and the

current status of the zone:

3 = SUN (SUNRISE / SUNSET AUTOMATIC CALCULATION)

The system automatically calculates the time of sunrise and sunset

each day. From the status menu, press the 3 (SUN) key on the console

keypad to display the calculated time of sunrise, sunset, and the

outdoor temperature (if an outdoor temperature sensor is installed):

Sunrise: 6:00 AM Temp

Sunset: 5:58 PM 85

4 = TEST (SYSTEM DIAGNOSTIC TEST)

The diagnostic test performed by the Omni allows you to check the

status of the battery, telephone, and security zone loop readings. The

display is updated 3 times per second, although the actual readings are

taken 10 times per second. To enter the Test menu, from the Status

menu, press the 4 (TEST) key on the console keypad.

The first display shows the current battery reading and the phone line

status. A battery test is initiated when the status mode is first entered.

The new battery reading is updated ten seconds later. The low battery

limit is also displayed.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 135 136

Sin comentarios

Console House 10 Mode Instrucciones de operaciones Pagina 50