Console House 10 Mode Instrucciones de operaciones descargar pdf (Pagina 58)

indicating that an alarm has occurred. Once the Omni has begun to

dial out, you must use the console to turn off the alarm.

You may call your system from any Touch Tone phone and "talk" to

your Omni, exactly as if you were at home, except that you must enter

your code (Master or Manager) to gain access to the Omni.

To call your system from any touch tone phone, call your number.

After 8 rings (or whatever you have Rings Before Answer set to) your

Omni will answer and "beep" - See Set Up Dial. Press the digits of

your code on the phone. The first digit must be pressed within 3

seconds of the beep. You will hear the menu.

If you hear three beeps after entering the code, you have entered the

wrong code. Try again. If you make a mistake while entering the

code, press the # key and then enter the code again. You only have

three tries to enter a valid code.

A successful remote access is logged in the event log as a Remote

Phone Access, along with the time, date of its occurrence, and the code

number used.

There are a number of setup items that control what you can do from a

remote phone when you or anyone else calls into your home -

See Set Up, Dial.

The Omni has a remote lockout feature to discourage youngsters (and

adults who act that way) from trying to access your system. If four

invalid codes are entered, the system will hang up and a one hour

lockout period will begin. During the lockout period, the Omni will

not answer a call after any number of rings, which should discourage

the caller.

If a lockout occurs, the event Phone Access Denied is entered into the

event log, along with the time and date of its occurrence.

Remote Phones

Phone Access

Denied -

Remote Lockout

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 135 136

Sin comentarios

Console House 10 Mode Instrucciones de operaciones Pagina 58