Console House 10 Mode Instrucciones de operaciones descargar pdf (Pagina 99)

Press # to change the On and Off times - See Set Up Codes.

DIAL OUT 1 ON:

12:00 AM MTWTFSS #=CHNG×

DIAL OUT 1 OFF:

NEVER #=CHNG×

For example, if your normal work hours are 8 to 5 Monday through

Friday, then set Dial Out 1 On to 8:00 AM MTWTF and Dial Out 1

Off to 5:00 PM MTWTF. With these settings, the system will call

Dial Out Number 1 only if the alarm is activated on weekdays between

the hours of 8:00 AM to 5:00 PM.

The default for Dial Out 1 On is 12:00 AM MTWTFSS, and the

default for Dial Out 1 Off is Never, so that Dial Out Number 1 is

always active.

The Time that was entered before setting an On or Off time to Never is

saved, and will be redisplayed when a day is set in place of Never.

Setting both the Dial Out 1 On and the Dial Out 1 Off times to Never

will make Dial Out Number 1 never active.

The default Dial Out On and Off times are the same as Dial Out

Number 1.

The dial order for AREA 1 is the order in which calls will be placed if

an Alarm is activated in AREA 1.

You can have the system make up to 8 calls in the event of an alarm.

You may chose from Dial Out Numbers 1 - 8. You can have the

system dial a number twice (or more) which is suggested if you don't

have a direct dial number at work, so that your company operator can

find you, if you aren't at your desk, and have you alerted for the next

call.

Up to eight numbers may be entered. Enter the Dial Out Order by

pressing the keypad digits 1, 2, 3, 4, 5, 6, 7, or 8 for Dial Out Numbers

Dial Out

Numbers 2 - 8

Area 1 Dial Order

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 135 136

Sin comentarios

Console House 10 Mode Instrucciones de operaciones Pagina 99